Caps & Seals

Novitain's TPE Push Caps-Capcluster is a fast, user-friendly and economical solution for short-term sealing of 13mm diameter sample collection tubes in the 50-well format Novitain Rack. After capping tubes, foil can be removed to leave tubes individually capped.

The SealPro dispenser contains a roll of pre-scored film (500 Pre-Scored Sheets) which provides easy film application for microplates. It is environmentally friendly, with no protective backing to remove or discard. There is a smooth lower surface for pressing film to the plate and is available sterile and non-sterile.

BaaySCI Cycle Seal Films (Raised) are for Real-Time PCR and storage. They fit inside raised rim plates to prevent evaporation, have a functional temperature range from -40°C to 120°C and are certified DNase- & RNase- free. They also have brilliant ultra-high optical clarity.

The films are for Pierceability & Autosampling. They have functional Temperature Range from -40°C to 90°C. The clear zone above each well is free of adhesive and is easily pierceable. The adhesive-free zones prevent adhesive fouling of pipet tips and probes which minimizes the amount of adhesive that comes into contact with the sample.

BaaySCI Platinum Seals are for PCR & Cold Storage and designed for thermal cycling and cold storage. They are certified DNase- & RNase- free, come in sterile or non-sterile options, and easily pierceable.

For Cell and Tissue Culture. Available Sterile (BYAP 50S) or Non-Sterile (BYAP 100). Non-Cytotoxic, Uniform air & C02 Exchange and minimizes cross-contamination & evaporation.

BaaySCI MultiPro films for ELISA, incubation, and general use are available sterile (BYMP 100S) or non-sterile (BYMP 100), with functional temperature range from -40°C to 120°C and are DNase- & RNase- free. The 2.0ml polypropylene film features good clarity and easy handling, minimizes evaporation, reduces cross-contamination, prevents spillage and removes easily and clearly from plate surfaces.

BaaySCI MultiStrip Films are designed to seal a single 8-well row of a 96-well plate. They are available in Sterile (BYMS 1X8 400S) and Non-Sterile (BYMS 1X8 400). They have a functional temperature range from -40°C to 120°C and are DNase- & RNase- free. They can be used to reseal rows that have been pierced, minimize evaporation and cross-contamination, minimize spillage and can be peeled individually or two strips at a time for increased efficiency.

BaaySCI Cycle Seal Edge Sticks are designed for real-time PCR and storage. They are available in a sterile or non-sterile format, have a functional temperature range from -80°C to 105°C and are certified DNase & RNase-free. They have high optical clarity with minimal autoflourescence, non-tacky silicone encapsulated, extra strong adhesive, chemically inert and DMSO resistant.

BaaySCI Quick Pierce Films are available sterile or non-sterile with a functional temperature range from -40°C to 90°C. There is a pre-cut “X” which enables piercing. They allow easy sampling by probes or tips without fouling or coring and reseal for continued sample protection after sampling.

BaaySCI PlatinumStrip Foil Strips are designed to seal PCR 8-tube strips & selective rows of a 96-well plate. They have functional temperature ranges -20°C to 120°C and are certified DNase- & RNase- free. A 96 round-well PCR or deep-well plate is recommended for sample prep. They are easier & faster to apply & remove than strip caps - and no sore thumbs!

The BaaySCI SealWell PCR & Storage Foil has a functional temperature range from -80°C to 120°C, is certified DNase- & RNase- free and is heat and cold resistant. Available in 96-well (BYSW 96 100) and 384-well (BYSW 384 100) formats. The 96-well format fits inside the rim of raised-rim plates.